Validation and application of an analytical method for determining pesticides in the gas phase of ambient air

A method for determining atmospheric concentrations of eight pesticides applied to corn and soybean crops in Mato Grosso state, Brazil is presented. The method involved a XAD-2 resin cartridge coupled to a low volume air pump at 2 L min^?1 over 8 hours. Pesticides were recovered from the resin using sonication with n-hexane:ethyl acetate and determined by GC-MS. Good accuracy (76–128%) and precision (CV < 20%) were obtained for atrazine, chlorpyrifos, alpha- and beta-endosulfan, endosulfan sulfate, flutriafol, malathion, metolachlor and permethrin. Method detection ranged from 9.0 to 17.9 ng m^?3. This method was applied to 61 gas phase samples collected between December 2008 and June 2009. Atrazine and endosulfan were detected both in urban and rural areas indicating the importance of atmospheric dispersion of pesticides in tropical areas. The simple and efficient extraction method and sampling system employed was considered suitable for identifying pesticides in areas of intense agricultural production.     

Assessing the impact of petrol stations on their immediate surroundings

This paper describes a novel methodology for evaluating the extent to which petrol stations affect their surroundings. The method is based on the fact that the ratio of the concentrations of aliphatic and aromatic hydrocarbon pollutants in the air of the petrol stations and their surroundings (basically determined by vapor emissions from unburned gasoline) differs from the ratio found in urban air, which is mainly influenced by traffic emissions. Bearing this in mind, the spatial limit of influence of petrol stations in any direction would be the first point, moving away from the station, where the ratio becomes equal to the urban background ratio. Application of the methodology involves multipoint measuring campaigns of the air at the studied petrol station and built-up area in general and processing the data with software capable of providing isoconcentration contours. The procedure should help local authorities in terms of land management, so that a “belt” can be established around petrol stations where housing or vulnerable populations and activities such as those in schools, hospitals and community centers should be restricted.     

The use of experimental data and their uncertainty for assessing ozone photochemistry in the Eastern Iberian Peninsula

Observation-based methods are useful tools to explore the sensitivity of ozone concentrations to precursor controls. With the aim of assessing the ozone precursor sensitivity in two locations: Paterna (suburban) and Villar del Arzobispo (rural) of the Turia river basin in the east of Spain, the photochemical indicator O₃/NO_y and the Extent-of-Reaction (EOR) parameter have been calculated from field measurements. In Paterna, the O₃/NO_y ratio varied from 0 to 13 with an average value of 5.1 (SD 3.2), whereas the averaged value for the EOR was 0.43 (SD 0.14). In Villar del Arzobispo, the O₃/NO_y ratio changed from 5 to 30 with a mean value of 13.6 (SD 4.7) and the EOR gave an averaged value of 0.72 (SD 0.11). The results show two different patterns of ozone production as a function of the location. The suburban area shows a VOC-sensitive regime whereas the rural one shows a transition regime close to NO_x-sensitive conditions. No seasonal differences in these regimes are observed along the monitoring campaigns. Finally, an analysis of the influence of the measurement quality of NO_y, NO_x and O₃ on the uncertainty of the O₃/NO_y ratio and the EOR was performed showing that the uncertainty of O₃/NO_y is not dependent on either its value or the individual values of O₃ and NO_y but just on the quality of O₃ and NO_y measurements. The maximum uncertainty is 26% as long as the combined uncertainties of O₃ and NO_y remain below the 7.5%. The case of the EOR is different and its uncertainty depends on both the value of the EOR parameter and the individual concentration values of NO_y and NO_x. The uncertainty of the EOR estimation can be very high (>200%) if the combined uncertainties of both NO_y and NO_x are high (>7.5%), or especially, if u(NO_y) and u(NO_x) differ considerably from each other (>3.5%).     

Microbial communities to mitigate contamination of PAHs in soil—possibilities and challenges: a review

Background, aim, and scope  

Although highly diverse and specialized prokaryotic and eukaryotic microbial communities in soil degrade polycyclic aromatic hydrocarbons (PAHs), most of these are removed slowly. This review will discuss the biotechnological possibilities to increase the microbial dissipation of PAHs from soil as well as the main biological and biotechnological challenges.     

Temporal evolution in PPCP removal from urban wastewater by constructed wetlands of different configuration: a medium-term study

Pharmaceuticals and personal care products (PPCPs) are widely distributed in urban wastewaters and can be removed to some extent by constructed wetlands (CWs). The medium-term (3-5 years) behaviour of these systems regarding PPCP removal is still unknown. Seven mesocosm-scale (1 m²) CWs of different configurations were operated outdoors for 39 months under the same conditions to assess their PPCP removal ability and temporal evolution. CWs differed in some design parameters, namely plant presence, species chosen (Typha angustifolia vs Phragmites australis), flow configuration and presence/absence of gravel bed (floating macrophytes surface flow, FM-SF; free-water surface flow, FW-SF; free-water subsurface flow, FW-SSF; or conventional horizontal subsurface flow, SSF). PPCP efficiencies decreased throughout time and performance differences among CWs disappeared with the systems aging. This could be due to a homogenization process in the systems caused by detrimental factors like saturation, clogging and shading. Winter efficiencies were lower than summer ones for salicylic acid, caffeine, methyl dihydrojasmonate, galaxolide and tonalide, and seasonal biological activities seem key factors to explain this fact. Maximal removal efficiencies were achieved in an unplanted-FW-SSF for ketoprofen (47-81%), naproxen (58-81%) and salicylic acid (76-98%); in an unplanted-SSF for caffeine (65-99%); in a Phragmites-FM-SF for ibuprofen (49-96%) and diclofenac (16-68%); in a Typha-FM-SF for carbamazepine (35-71%); and in a Typha-FW-SSF for methyl dihydrojasmonate (71-96%), galaxolide (67-82%) and tonalide (55-74%). Photodegradation could be involved in ketoprofen, naproxen, ibuprofen and diclofenac removal. Carbamazepine and diclofenac were moderately removed by the most efficient CWs studied. Carbamazepine might be eliminated by vegetal uptake.     

BIOAMBIENT.ES study protocol: rationale and design of a cross-sectional human biomonitoring survey in Spain

Human biomonitoring (HBM), defined as the measurement of concentrations of chemicals or of their metabolites in human biological matrices, is considered the method of choice for determining internal exposures in individuals. HBM is part of environmental exposure surveillance systems in several countries. In 2007, the Ministry of Agriculture, Food and Environment promoted BIOAMBIENT.ES project, a national-level HBM study on environmental pollutants carried out in Spain to estimate levels of heavy metals, persistent organic pollutants, and other substances on the Spanish active workforce. BIOAMBIENT.ES is a nationwide cross-sectional study, with a stratified cluster sampling designed to cover all geographical areas, sex and occupational sectors, and aimed to obtain a representative sample of the Spanish workforce. Participants were recruited among people residing in Spain for 5 years or more, which underwent their annual occupational medical check-up in the health facilities of the Societies for Prevention of IBERMUTUAMUR, MUTUALIA, MC-PREVENCIÓN, MUGATRA, UNIMAT PREVENCIÓN, and PREVIMAC (March 2009–July 2010). A total of 1,892 subjects fulfilled the criteria for inclusion, donated biological samples (1,880 blood, 1,770 urine, and 577 hair) and completed a short self-administrated epidemiological questionnaire on environmental and lifestyle-related exposures. Additionally, clinical information from participant’s health exams was obtained. This project will provide a first overview of the body burden of selected pollutants in a representative sample of the Spanish-occupied population. This information will be useful to establish reference values of the studied population and, eventually, to evaluate temporal trends and the effectiveness of environmental and health policies.     

An innovative approach to inventory and monitoring of natural resources in the Mexican State of Jalisco

This paper discusses the statistical design and estimation processes developed for the assessment of key land resources relevant to questions of their condition and change in the State of Jalisco, Mexico. Some initial results of the first phase of Jalisco's Natural Resource Inventory and Monitoring Program (IMRENAT) conducted in 2006 are presented and discussed. Since this is a relatively new approach for an inventory and monitoring program of this magnitude, designed from the beginning specifically for integration with orbital satellite data, it is anticipated that changes will have to be made over time to improve conceptual and operational design aspects. Alternative remote sensing capabilities to further improve local information, more sophisticated analysis to satisfy the requirements of officials as they become more aware of the capabilities of the system, possible improvements in change assessments over time, and opportunities to focus on specific interesting changes will be assessed. As this study indicates, current and future information technology advancements provide a solid prospect for the development and application of integrative sampling strategies to support sustainability science and management processes.     

Costs of the electrochemical oxidation of wastewaters: a comparison with ozonation and Fenton oxidation processes

In the work described here the technical and economic feasibilities of three Advanced Oxidation Processes (AOPs) have been studied: Conductive-Diamond Electrochemical Oxidation (CDEO), Ozonation and Fenton oxidation. The comparison was made by assessing the three technologies with synthetic wastewaters polluted with different types of organic compounds and also with actual wastes (from olive oil mills and from a fine-chemical manufacturing plant). All three technologies were able to treat the wastes, but very different results were obtained in terms of efficiency and mineralization. Only CDEO could achieve complete mineralization of the pollutants for all the wastes. However, the efficiencies were found to depend on the concentration of pollutant (mass transfer control of the oxidation rate). Results obtained in the oxidation with ozone (at pH 12) or by Fenton's reagent were found to depend on the nature of the pollutants, and significant concentrations of oxidation-refractory compounds were usually accumulated during the treatment. Within the discharge limits that all of the technologies can reach, the economic analysis shows that the operating cost of Fenton oxidation is lower than either CDEO or ozonation, although CD\EO can compete satisfactorily with the Fenton process in the treatment of several kinds of wastes. Likewise, the investment cost for the ozonation process seems to be higher than either CDEO or Fenton oxidation, regardless of the pollutant treated.